1. Washing Machine Not Turning On
- Check if the power cord is securely plugged in.
- Inspect the circuit breaker for any tripped switches.
- Test the lid switch or door lock for defects.
- Reset the machine by unplugging it for a few minutes.
2. Water Not Draining Properly
- Clean the drain pump filter to remove lint and debris.
- Ensure the drain hose is not twisted or clogged.
- Inspect the pump motor for any faults.
- Verify that the drainage pipe is correctly installed.
3. Loud Noises During Operation
- Remove any foreign objects from the drum.
- Ensure the washing machine is balanced on a stable surface.
- Check the drum bearings & suspension rods for wear.
- Tighten any loose screws or bolts.
4. Excessive Vibrations While Washing
- Ensure the machine is placed on a level surface.
- Distribute clothes evenly inside the drum.
- Inspect the shock absorbers and suspension springs.
- Check for loose motor mounts and secure them.
5. Washing Machine Not Spinning
- Confirm that the spin cycle settings are correct.
- Inspect the drive belt and motor coupling for damage.
- Ensure the lid switch or door lock is functioning properly.
6. Water Leaking from the Machine
- Inspect the water inlet and drain hoses for leaks.
- Clean the detergent drawer to remove clogs.
- Check the rubber door seal for any dirt or lint buildup.
- Ensure the water pump is free from leaks or damage.
7. Clothes Not Cleaning Properly
- Avoid overloading the washing machine.
- Use the recommended detergent type and quantity.
- Check if the drum rotates at the correct speed.
- Ensure the water inlet valve is functioning properly.
8. Machine Stops in the Middle of a Cycle
- Check for power supply fluctuations or interruptions.
- Inspect the timer and control board for faults.
- Ensure the washing machine lid is securely closed.
- Restart the machine after a reset.
9. Foul Smell from the Washing Machine
- Run a hot water cycle with vinegar or a washing machine cleaner.
- Clean the detergent drawer and rubber gasket regularly.
- Keep the machine door open after each use for ventilation.
- Remove lint buildup from the filter.
10. Error Codes Appearing on Display
- Refer to the user manual to identify the issue.
- Try resetting the machine by unplugging it for a few minutes.
- Contact HouseTriangle for expert repairs.